GMS-800:
Product max quantity:2L
Appropriate for blowing bottles between 150ml to 2000ml
Needed auxiliary devices:Large stress air compressor, Air filter.
Semi-computerized blow moulding device
- Use integated mic pc controler,with OMRON handle chip,the response velocity is quite swiftly and the timing extremely precisely.Use existence tough and failture price very reduced.It truly is the revolutionary product of industrial handle.
- High responsivenesspneumatic elements,motion well timed and exactly
- Thorough safe procedure system,start-up with two fingers,steer clear of the accident during the operation
- Infrarted heating engineering,safe and vitality conservation,no pollution of the surroundings.With the eight charges adjustable temperature controler,make the temperature ideal for blowing.
Technological innovation advantage:
- Special style,substantial rigid compound die construction
- Wide adaptability, suitable for each type mould thickness
- Modify usefulness
- No mould rolling out
- A lot more energy conservation,no need considerably air provide
- High burnish principal axis, with really exact sharpening, light action and reduced noise.
- Quick mould stroke,quick motion
- All ZG45 casting, with prolonged timing method,very modest transformation,can satisfy your specific request a hundred%
- Hig dead-weigh, make sure the steady in the course of the operation
Main parameters :
| Principal machine (blowert + oven) |
Product sort | Tech information |
| Solution Spec | Max. solution volume(L/cav) | two |
| Max. preform neck dimension(mm) | a hundred | |
| Max. solution diameter(mm) | one hundred eighty | |
| Max. item height (mm) | 300 | |
| Cavities | two | |
| Blow molding part | Die pressure (KN) | a hundred |
| Die stroke (mm) | 270 | |
| Max. mould measurement(mm) | 390*345 | |
| Mould thickness | Adjustable | |
| Mould spacing(mm) | ||
| Max. pulling stroke(mm) | 400 | |
| Procedure force(Mpa) | .8-one. | |
| Procedure air stress consumption (1tr/min) |
two hundred | |
| Blow force(Mpa) | 1.two-two.eight | |
| Blow air strain usage (1tr/min) | 300 | |
| Output(pcs/h) | 800-a thousand | |
| Machine size(LxWxH)(m) | 1.46*.fifty eight*one.eight | |
| Device fat(KG) | 650 | |
| Oven | Temperature quality(charge) | eight |
| Heating time(S) | 90-two hundred | |
| Voltage(V) | 220 or as your request | |
| Frequency(HZ) | fifty/60 | |
| Overall electrical power(KW) | 16 | |
| Oven Dimensions (LxWxH) | one.sixty*.55*one.40 | |
| Oven fat (KG) | 200 |
Attributes:
- Adopt the new variety double bend arm and 4 pull rod-clamping structure (received the patent). Cross path center mould board is go parallel the length among two mould bases is adjusted by the chain wheel. Hence, the clamping power is quite robust.
- The equipment body is created by the total comprehensive casting bottom, so that the machine is organization and operating stable.
- Undertake the straight slide way, reduce the friction and lengthen the life of the equipment.
- CZPT start off working button, which is created for keeping away from the injury.
- Electricity saving style that can improve your profits.
- The solitary route of pre-kind putting and bottle selecting, which improve the output.
- Segregate kind air controlling system, which is developed for steering clear of squander pollution.
- The stretching air cylinder is adjusted parallel from front to back, from remaining to right freely by regulator.
- CZPT Parameter:
| Standard Details | YD-1500 |
| Theoretial output | 700~1500PCS/hr |
| Heating capacity | 9.8kw |
| Max bottle volume | 1.5L(two cav) |
| Blowing force | ≤3.5Mpa |
| Movement Force | ≤1.0Mpa |
| Max*deameter*top | Ø 140XH340mm |
| Mould thickness | 120~220mm |
| Excess weight | 850kg |
| Primary Equipment | 1450*seven hundred*1750mm |
| Heater | 1800*750*1400mm |
